Victron Lynx Power In (M10) | LYN020102010 | modular DC busbar

Victron Lynx Power In (M10) | Part of the Lynx distribution system

for 12V / 24V / 48V battery systems | modular DC busbar | 4 connections for batteries, loads or chargers

The Lynx Power In (M10) is a modular DC busbar used to connect batteries to the Lynx DC distribution system. It is generally used in a Lynx distribution system in conjunction or combination with a Lynx Shunt or Lynx BMS or the Lynx Distributor. However, the Lynx Power In (M10) can also be used completely independently of the Lynx distribution system as a modular DC busbar. It has a positive and negative busbar with 4 connections for batteries, loads or chargers and an earth connection. Several Lynx Power In can be connected in series.

The Lynx Power In (M10) is also available as a Lynx Power In (M8). Please note that M10 refers to the connections on the busbar to which the modules are connected. The fuse and cable connections are always M8.

Its most important features:

• for 12V / 24V / 48V battery systems
• independent use of the Lynx distribution system as a DC busbar
• 4 connections for batteries, loads or chargers
• one earth connection
• possibility to connect several Lynx Power In modules

fuses

The Lynx Power In (M10) has no slots for fuses, fusing must be provided externally. If you are looking for a busbar with integrated fuse holders and status monitoring for the fuse status, then take a look at the Lynx Distributor (M8) or the Lynx Distributor (M10).

Always use fuses with the correct voltage and current rating. Match the fuse rating to the maximum voltages and currents that can potentially occur in the fused circuit.
Note: When selecting the fuse, please note that the continuous current on the fuse should not exceed 80% of the fuse rating.

System example for interconnected Lynx modules

Interconnected Lynx modules from left to right: Lynx Power In (M10), Lynx Shunt VE.Can with CNN fuse and Lynx Distributor

System example - Lynx Power In only

In this system, one Lynx Power In is used alone. It is possible to connect several Lynx Power In modules together to create a longer busbar with more connection options for batteries and/or loads.

The Lynx Power In has no fuses. All connected loads, chargers or batteries must be fused externally.

From left to right the Lynx modules: Lynx Power In, Lynx Class-T Power In, Lynx Distributor, Lynx Shunt VE.Can and Lynx Smart BMS.

Scope of delivery

• Victron Lynx Power In (M10) | LYN020102010 | modular DC busbar
• Of course, you can also obtain operating instructions in German from us in the download area

Victron manufacturer's warranty

• Lithium batteries: 3-year manufacturer's warranty
• Lead/gel/AGM batteries: 2-year manufacturer's warranty
• All other products: 5-year manufacturer's warranty, extendable to 10 years

Further helpful tips can be found in our FAQ questions/answers page under the following FAQ link .

Lynx Power In (M10)

Physical topology

ENVIRONMENT