Victron Blue Smart IP22 charger | 12V / 30A / 230V | Bluetooth | 3 outputs | BPC123048002

Victron battery charger 30A / 12V / 230V | with Bluetooth | Charging three battery banks

6-stage adaptive Charge algorithm with 3 charging outputs

for Boats, Caravan, Camper, RV and Industry

High efficiency
With up to 93% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.

NEW! Bluetooth
The Blue Smart Charger is our new professional battery charger with Bluetooth built in! This enables you to see the information from your charger on your smartphone, tablet or computer, using the VictronConnect app.

Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage
The Blue Power charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.

Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.

Also charges Li-ion (LiFePO₄) batteries
LiFePO₄ batteries are charged with a simple bulk – absorption – float algorithm.

NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended
manually.

Temperature compensated charging
The optimal charge voltage of a lead-acid battery varies inversely with temperature. The Blue Power IP22 Charger measures ambient temperature during the test phase and compensates for temperature during the charge process. The temperature is measured again when the charger is in low current mode during float or storage. Special settings for a cold or hot environment are therefore not needed.

The MODE button
After connecting the charger to the AC supplyI, press the MODE button to select another charging algorithm if required
(the charger remembers the mode when disconnected from the mains and/or the battery).

VE.Smart Networking
The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart.

Protected against overheating
Output current will reduce as temperature increases up to 50°C, but the Blue Power charger will not fail.

Eleven LED’s for Status indication
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY.
MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION.

Five year limited warranty
This limited warranty covers defects in materials and workmanship in this product, and lasts for five years from the date of original purchase of this product. The customer must return the product together with the receipt of purchase to the point of purchase (for details see user manual).

Delivery contains:

• Victron Blue Smart IP22 charger | 12V / 30A / 230V | Bluetooth | 3 outputs | BPC123048002

Further informations you can find here: FAQ

Technical details:

• Input voltage range: 180-265V AC
• Frequency: 45-65Hz
• Charge current, normal mode: 30A
• Charge current, NIGHT or LOW: max. 15A
• Efficiency: 93%
• No load power consumption: 0,5W
• Inrush current: max. 3A (690W)
• Number of outputs: 3
• Charge voltage 'absorption': 14,4V  /  High: 14,6V  /  Li-ion: 14,2V
• Charge voltage 'float': Normal: 13,8V  /  High: 13,8V  /  Li-ion: 13,35V
• Charge voltage 'storage': 13,2V  /  High: 13,8V  /  Li-ion: n.a.
• Charge algorithm: 6-stage adaptive
• Can be used as power supply: yes
• Protection: Battery reverse polarity (fuse)  /  Output short circuit  /  Over temperature
• Operating temp. range: -20 bis +50℃
• Humidity (non condensing): max. 98%
• Material & Colour: Aluminum (blue RAL 5012)
• Battery connection: Screw terminals 14mm² / AWG6
• 230V AC connection: Cable of 1,5 meter with CEE 7/7 plug
• Protection category: IP22
• Weight: 1,3kg
• Dimensions (H x W x D): 235 x 108 x 65 mm
• Standards (Safety): EN 60335-1, EN 60335-2-29
• Standards (Emission): EN 55014-1, EN 61000-6-3, EN 61000-3-2
• Standards (Immunity): EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3